Table of Contents
Advertisement
Slider bar
By operating the slider bar, you can select where to start playing images from. The slider bar can only be
used before playing images, or when playing is paused or stopped.
(PAUSE) button
Playback will be paused when this button is clicked during playback.
(PLAY) button
When this button is clicked, recorded data will be played.
(FF) button
Each time this button is clicked, the playback speed will change. When the
playback, playback speed will return to the normal playback speed.
Note
•
The maximum speed of the fast playback varies depending on the setting of "Bit rate" - "Stream
recording" of the SD memory card.
(5s backward) button
Each time this button is clicked, the recorded data goes back by 5 seconds and starts playing.
(5s forward) button
Each time this button is clicked, the recorded data goes forward by 5 seconds and starts playing.
(STOP) button
Playback will stop and the "Playback" window will turn to the "Live" page.
[Time & date]
Time and date when each log has been recorded will be displayed.
[Duration]
Displays the period of time that the data has been recorded on the SD memory card.
[Event]
The event type will be displayed.
•
MN/SC: Log by "Manual/Schedule"
•
VMD: Alarm by VMD alarm
•
SCD: Alarm by SCD alarm
•
COM: Alarm by command alarm
(Start) button
The selected image will be downloaded onto the PC.
Before downloading images, designate the destination directory in advance. (®page 62)
The message window will be displayed to ask if it is OK to start download when the
the [OK] button.
Note
•
The image playing screen cannot be operated while downloading. Perform operations after the
downloading is completed.
1 Operations
button is clicked during fast
button is clicked. Click
Operating Instructions
31
Advertisement
Table of Contents
