Table of Contents
Advertisement
Note
•
One-click of the [Near] or [Far] button is a fine adjustment, and it can look like there is no change
in the focus. To shift the focus point largely, keep the button pressed.
Auto focus [WV-U2542L][WV-U2532L][WV-U1542L][WV-U1532L][WV-U2142L][WV-U2132L]
[WV-U1142][WV-U1132]
[Excute]: When you press the button, the auto focus function works andautomatically adjusts the focus
to the subject in the center area of the screen.
IMPORTANT
•
With "16:9 (30fps mode)" selected for "Image capture mode", if "Auto focus" is executed during
slow shutter operation at night while a value longer interval than "Max.1/30s" (Max.2/30s, Max.
4/30s, Max.6/30s, Max.10/30s, or Max.16/30s) is selected for "Maximum shutter", completing
auto focus may take a long time.
•
With "16:9 (25fps mode)" selected for "Image capture mode", if "Auto focus" is executed during
slow shutter operation at night while a value longer interval than "Max.1/25s" (Max.2/25s, Max.
4/25s, Max.6/25s, Max.10/25s, or Max.16/25s) is selected for "Maximum shutter", completing
auto focus may take a long time.
•
In the following locations or with the following subjects, the focus may not be able to be
automatically adjusted. In this case, manually adjust the focus.
–
when the subject moves a lot
–
when there are large changes to the lighting intensity
–
when the light level is low
–
when the subject or location is extremely bright or reflective
–
when viewing through windows
–
when the dome cover is in a location where it can easily become dirty
–
locations where there is not much contrast such as a white wall
–
when there is harsh flickering
•
When images in the near-infrared light area change from color to black & white, images may
be out of focus due to the nature of optical properties. In this case, the focus can automatically
be corrected by selecting "Auto" or "Preset" for "Adjusting method" (the focus will not
automatically be adjusted according to the illumination level change once the focus is
corrected).
[Brightness adjustment] button
Adjust the brightness.
Click the [+] button to make the image brighter.
Click the [-] button to make the image darker.
Click the [Reset] button to reset to the default brightness setting.
[Close] button
Close the setup menu.
Note
•
When the HTTP port number is changed from "80", enter "http://IP address: (colon) + port number"
the address box of the browser. When using the DDNS function, access to "http://Host name registered
in the DDNS server: (colon) + port number"
•
When "HTTPS" is selected for "HTTPS" - "Connection" on the [Advanced] tab of the "Network" page,
enter as follows.
"https://IP address: (colon) + port number" or "https://Host name registered in the DDNS server: (colon)
+ port number"
•
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the mobile terminal in use, password entry may be required each time the
screen is switched.
*3
.
*3
1 Operations
in
*1
Operating Instructions
21
Advertisement
Table of Contents
