Panasonic WV-U2500 Series Operating Instructions Manual page 157

•
Recording to SD (Recording stream): The SD recording configured in "Recording stream" will be
performed at the designated time in the schedule. Only available when a stream is selected in
"Recording format".
•
Image adjust 1: Scene 1: Images are set to the image settings of "Scene file 1" at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of "Scene file is not applied".
•
Image adjust 1: Scene 2: Images are set to the image settings of "Scene file 2" at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of "Scene file is not applied".
•
Image adjust 1: Scene 3: Images are set to the image quality settings of "Scene file 3" at the
designated time in the schedule. Once designated time in the schedule is over, the image quality setting
is set to "Scene file is not applied".
•
Image adjust 1: Scene 4: Images are set to the image quality settings of "Scene file 4" at the
designated time in the schedule. Once designated time in the schedule is over, the image quality setting
is set to "Scene file is not applied".
•
E-mail permission: While the schedule is set, e-mail notification is sent when alarm is input.
•
Reboot: The camera reboots at the scheduled time. Can only be selected with Schedule 5.
Note
•
Select "On" for "User auth." on the [User auth.] tab of "User mng." page (®page 110) and "Off" for
"Host auth." on the "Host auth." page (®page 113) to validate "Access permission".
•
When selecting "Recording to SD(Recording stream)", select "Stream(1)", "Stream(2)", or
"Stream(3)" for "Recording format" on the [SD memory card] tab and select "Schedule" for "Save
trigger". (®page 59)
2.
Select days of a week by checking the respective checkboxes.
3.
From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of "24h".
4.
Click the [Set] button after completing the settings.
→
The result will be displayed at the bottom of the window.
Note
•
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
2 Settings
Operating Instructions 157