Table of Contents
Advertisement
2 Settings
[Post alarm (recording) duration]
Set the duration to save image data on the SD memory card after an alarm occurrence.
10s/ 20s/ 30s/ 40s/ 50s/ 60s/ 120s/ 180s/ 240s/ 300s
•
Default: 30s
* The actual recording time may sometimes be longer than the duration selected for this setting.
SD memory card information
[Remaining capacity]
Total capacity and remaining capacity of the SD memory card will be displayed.
Depending on the status of the SD memory card, the size indications will differ as follows.
Indication
----------MB/----------MB
**********MB/**********MB
Note
•
When "Off" is selected for "Overwrite" and the available size of the SD memory card is "0 MB", images
will not be saved on the SD memory card. When the notification function is on, a notification will be
sent to the registered addresses and destinations of the Panasonic alarm protocol when the SD
memory card becomes full. (®page 95, page 105)
[Format]
To format the SD memory card, click the [Execute] button.
IMPORTANT
•
Before formatting the SD memory card, it is necessary to select "Use" for "SD memory card" on the
[SD memory card] tab of the "Basic" page (®page 57).
•
Use the SD memory card after formatting it using the [SD memory card] tab. If using the SD memory
card that has not been formatted on the [SD memory card] tab, the following functions may not work
correctly.
–
Save/obtain alarm images
–
Save/obtain images saved manually
–
Save/obtain images in accordance with the schedule settings
–
Save/obtain the alarm logs, the manual/schedule logs, and the system logs
–
Save/obtain images recorded using the SD memory recording function of our network disk recorder
–
Play/download images on the SD memory card
•
When an SD memory card is formatted while another user is in operation, the operation will be
canceled.
•
It is impossible to access the SD memory card during the process of formatting.
•
All data saved on the SD memory card will be deleted when the SD memory card is formatted.
•
Do not turn off the power of the camera during the process of formatting.
•
After formatting the SD memory card, available size may be smaller than the total size since the default
directory is automatically created in the SD memory card.
•
Refer to our website (https://security.panasonic.com/training_support/support/info/ <Control
No.:C0107>) for latest information about the compatible SD memory cards.
•
When repeatedly recording images on an SD memory card using the auto overwrite function, make
sure to use an SD memory card with high reliability and durability.
•
Use the SD memory card that complies with UHS-1(Ultra High Speed-1) in the case of SD Speed
Class10.
60
Operating Instructions
No SD memory card is inserted. Failed to obtain available capacity
due to error, etc.
The SD memory card is unformatted.
Description
Advertisement
Table of Contents
