Panasonic WV-U2500 Series Operating Instructions Manual page 54

2 Settings
Note
•
When "4:3 (30fps mode)" or "4:3 (25fps mode)" is selected for "Image capture mode", "90 °" and "270
°" are not available.
•
When [Image capture size] of any of JPEG(1), JPEG(2), Stream(1), Stream(2) and Stream(3) is set to
"320x180", "90 °" and "270 °" will become unavailable for [Image rotation].
•
When the following settings for Stream(1) are set simultaneously, [Image rotation] cannot be set to "90
°" or "270 °".
–
[Image capture size]: 2560x1440
–
[Frame rate*]: "20fps*" or more
–
[GOP control]: On(Advanced)
[Indicator]
Determine whether or not to use the following indicators. Select "On" to use the following indicators to check
the operational status by lighting them.
–
Link indicator (LINK)
–
Access indicator (ACT)
•
Default: On
Note
•
Link indicator (LINK) (orange): This indicator will light when communication with the connected
device is available.
•
Access indicator (ACT) (green): This indicator will blink when accessing a network.
[Status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button or the "SD recording status
indicator" will be displayed in the "Live" page to notify of the camera status.
•
Polling(30s): Updates the status each 30 seconds and provide notification of the camera status.
•
Real time: Provide notification of the camera status when the status has changed.
•
Default: Real time
Note
•
Depending on the network environment, notification may not be provided in real time.
•
When multiple cameras are using the same "Status reception port", even if "Real time" is selected for
"Status update mode", status notification is not provided in real time. In this case, change the "Status
reception port" settings.
[Status reception port]
When selecting "Real time" for "Status update mode", designate a port number to which the status change
notification is to be sent.
•
Available port number: 1 - 65535
•
Default: 31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Viewer software (nwcv5Ssetup.exe)] - [Automatic installation]
Determine whether or not to directly install the viewer software from this camera.
•
On: Installs the viewer software from the camera automatically.
•
Off: The viewer software cannot be installed from the camera.
•
Default: On
54 Operating Instructions
U153x U253x
U154x U254x U114x
U113x U213x
U214x