Panasonic WV-U2500 Series Operating Instructions Manual page 4

Preface
[Password (8 to 32 characters)]/[Retype password]
Enter the administrator password.
Available number of characters: 8 - 32 characters
Unavailable characters: 2-byte characters, and 1-byte symbols " &
Note
•
Distinguish between upper- and lower cases.
•
For the password, use three or more types of characters from upper- and lowercase alphabetic
characters, numeric characters, and symbols.
•
Set the password which does not include the user name.
IMPORTANT
•
If you forgot or do not know the password or user name, the camera must be initialized. Because all
settings other than preset position settings are deleted when the camera is initialized, make sure to
keep the information secure from third parties. Refer to "Parts and functions" section in the Installation
Guide for more information about initializing the camera.
•
It is recommended to change the password periodically.
•
Do not use the password already used for other camera or device.
The registration completion screen will be displayed after registering a user name and password of the
administrator. After 10 seconds, the camera will be reconnected automatically. Please click "here" if it is not
displayed automatically.
When the camera is reconnected to, an authentication window is displayed. Enter the registered user name
and password to start operation.
Viewer software
In order to display H.265 images and play images saved on the SD memory card, the "Network Camera View
5S" (ActiveX ) viewer software must be installed. Install this Viewer Software directly from the camera
®
4 Operating Instructions