Panasonic WV-CP474H Operating Instructions Manual

(Lens: Option)
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended to
alert the user to the presence
of uninsulated "dangerous volt-
age" within the product's enclo-
SA 1965 sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
SA 1966
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liq-
uids, such as vases, shall be placed on the apparatus.
PREFACE
Panasonic's WV-CP474H series color digital camera introduces a new level of high picture
quality and high resolution through the use of a 1/3-inch interline transfer CCD image sensor
having 771 horizontal pixels (picture elements), and digital signal processing LSIs. This
model offers cutting-edge technology for advanced video surveillance.
PRECAUTIONS
1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user-serviceable parts inside. Ask a qualified service personnel for servic-
ing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
3. The installation should be made by qualified service personnel or system
installers.
4. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. When the dirt is hard to remove, use a
mild detergent and wipe gently. Then wipe off the remaining detergent with a dry cloth.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton
tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never
aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may
be caused.
7. Do not operate the camera beyond the specified temperature, humidity or power
source ratings.
Use the camera at temperatures within –10 °C to +50 °C (14 °F - 122 °F), and humidity
below 90 %. The input power source is 24 V.
8. Avoid do connections during a lightning storm.
Otherwise, electric shock may be caused.
Caution:
To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for
the AC 24 V Input Cable.
Color CCTV Camera

Operating Instructions

WV-CP474H
Model No.
N1002-0 3TR001320AAA Printed in Japan
N 19
For U.S.A
NOTE: This equipment has been tested and
found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence when the equipment is operated in a
commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required to correct
the interference at his own expense.
FCC Caution: To assure continued compli-
ance, (example - use only shielded interface
cables when connecting to computer or
peripheral devices). Any changes or modifica-
tions not expressly approved by the party
responsible for compliance could void the
user's authority to operate this equipment.
The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
Model No. WV-CP474H
Serial No.
FEATURES
1. The following functions are built in.
(1) Auto Light Control (ALC)/Electronic Light Control (ELC)
(2) The SUPER-D2 function eliminates interference by strong background lighting
which makes the camera picture dark, such as a spotlight.
Dynamic range of 46 dB.
(3) Internal Line-locked Multiplex Vertical (VD2) Sync.
(4) Auto/Manual White Balance Function
(5) Electronic Shutter Function
2. Signal-to-noise ratio of 50 dB (Equivalent to AGC Off)
3. Minimum Illumination of 0.8 lx (0.08 foot-candle) at color mode, 0.1 lx (0.01 foot-candle)
at black and white mode with F1.4 lens.
4. 480 lines of horizontal resolution
5. High quality picture:
(a) 2H type vertical enhancer for greater picture sharpness
(b) Chroma averaging circuit for better color signal-to-noise ratio
(c) Minimum of aliasing on fine objects
(d) Expanded dynamic range by use of knee circuit
(e) Highlight aperture correction for greater picture detail of bright objects
6. Ability to shoot indoor scenes with fixed iris lens by use of Electronic Light Control (ELC)
function.
7. Selectable electronic sensitivity enhancing modes including AUTO, MANUAL and OFF
8. Built-in Digital Motion Detector
9. Auto black-and-white mode enables the camera to switch between color and black-
and-white picture in response to light input.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
q w e
r
!0
!1
Slide the panel to the left until it locks.
q Auto Iris Lens Connector
Connects the auto iris lens with a 4-pin male connector supplied as a standard acces-
sory (Part No. YFE4191J100).
w Flange-back Adjusting Ring & Screw
Adjusts the back focal length and picture focus.
e Lens (Option)
r Camera Mounting Screw Hole
Mounts the camera onto a mounting bracket.
t Down Button (D)
Moves the cursor downward and selects items in the CAM SET UP menu.
y Left Button (L)
Moves the cursor to the left, selects the mode and adjusts some levels.
u Up Button (U)
Moves the cursor upward and selects items in the CAM SET UP menu.
i Right Button (R)
Moves the cursor to the right, selects the mode and adjusts some levels.
o Set Button (SET)
Activates an item selected in the CAM SET UP menu.
!0 Video Output Cable with BNC Connector
Connects the VIDEO IN connector of the monitor.
!1 Power Cable
!2 Alarm Output Terminal (ALARM OUT/GND)
Connects to the alarm input connector (terminal) of an external device. When the cam-
era detects motion, the alarm output signal is supplied to the connected external device
(Open collector output: 16 V DC, 100 mA max).
!3 Day/Night Input Terminal (DAY/NIGHT IN/GND)
This terminal is used for connecting the camera to an external day/night detecting sen-
sor.
y uo
Color CCTV Camera
U
Model No. WV-CP474H
i
POWER 24V~60Hz 4.3W
VIDEO OUT 1V[p-p] 75 L R
Monufochured by Matsushita
SET
t
Communication industrial
D
Co.Ltd. Yokohama Japan
Made in Japan
FOR COMMERDAL USE ONLY
GND DUT
Day /
ALARM
Night IN
GND
POWER
!3 !2