Related Manuals for Panasonic WV-BP330
Summary of Contents for Panasonic WV-BP330
- Page 1 CCTV Cameras WV-BP330/WV-BP332/WV-BP334 (Lens : option) Before attempting to connect or operate this product, please read these instructions completely.
- Page 2 ENGLISH VERSION We declare under our sole responsibility that the product to which this declaration relates is in conformity with the stan- CAUTION dards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. RISK OF ELECTRIC SHOCK DO NOT OPEN Noi dichiariamo sotto nostra esclusiva responsabilità...
- Page 3 A replacement fuse cover can be purchased from your local Panasonic The wire which is coloured blue must be connected to the terminal in Dealer. the plug which is marked with the letter N or coloured black.
-
Page 4: Table Of Contents
CONTENTS PREFACE ..................................3 FEATURES ..................................3 PRECAUTIONS ................................4 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ..................5 CONNECTIONS ................................9 FOCUS OR BACK-FOCAL ADJUSTMENT ........................14 INSTALLATION OF CAMERA ............................15 PREVENTION OF BLOOMING AND SMEAR ........................ 16 SPECIFICATIONS ................................17 STANDARD ACCESSORIES ............................ -
Page 5: Preface
PREFACE Panasonic’s WV-BP330 series digital cameras intro- ture elements), and digital signal processing LSI’s. This duce a new level of high picture quality and high reso- model offers cutting-edge technology for advanced lution through the use of a 1/3-inch interline transfer video surveillance. -
Page 6: Precautions
90%. The input power source is shock. 220-240V AC 50Hz for WV-BP330, 12V DC for WV- BP332, and 24V AC 50Hz for WV-BP334. 4. Do not use strong or abrasive detergents when cleaning the camera body. -
Page 7: Major Operating Controls And Their Functions
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS <WV-BP330> AGC ON BP330 BLC ON VIDEO Hi-Z G/L 75 Ω GEN-LOCK VIDEO OUT V. PHASE VIDEO LEVEL <WV-BP332> DC 12V IN AGC ON BLC ON VIDEO Hi-Z G/L 75 Ω GEN-LOCK VIDEO OUT... - Page 8 Back-focal Adjusting Ring i Synchronization Mode Selector This ring is adjusts the back-focal length or picture (INT, LL (only WV-BP330 and WV-BP334)) focus. Rotate this ring clockwise for a C-mount Selects the camera synchronization mode from lens or counterclockwise for a CS-mount lens.
- Page 9 !4 Vertical Phase Control !1 Back Light Compensation Mode Selector (BLC (V. PHASE (only WV-BP330 and WV-BP334)) Allows you to adjust the vertical phase of the cam- ON, OFF) era signal to match the vertical phase of the line Lets you select the mode according to the position power.
- Page 10 !7 Gen-lock Input Connector (GEN-LOCK) This connector is for connecting an external sys- tem for synchronization. Caution: Connect to 12V DC (10.5V-16V) or 24V AC (19.5V-28V) class 2 power supply only. Make sure to connect the grounding lead to the GND terminal when the power is supplied from a 24V AC power source.
-
Page 11: Connections
CONNECTIONS Resistance of copper wire [at 20°C (68°F)] A. WV-BP330 (220-240V AC 50Hz) Connect the power cord to an electrical outlet of Copper wire size (AWG) (0.22mm (0.33mm (0.52mm (0.83mm 220-240V AC 50Hz. Resistance 0.078 0.050 0.030 0.018 Ω/m B. WV-BP332 (12V DC) Resistance 0.026... -
Page 12: Video Cable
C. WV-BP334 (24V AC 50Hz) Video Cable Connect the power cable to the AC 24V IN termi- 1. It is recommended to use a monitor whose resolu- nal on the rear panel of the WV-BP334. tion is at least equal to that of the camera. 2. - Page 13 Type of RG-59/U RG-6/U RG-11/U RG-15/U coaxial cable (3C-2V) (5C-2V) (7C-2V) (10C-2V) Recommended maximum cable length (ft) 1 650 1 980 2 640 3. Wiring precautions: • Do not bend the coaxial cable into a curve whose radius is smaller than 10 times the cable’s diame- ter.
- Page 14 Installation of Auto Iris Lens Connector (2) After connection, assemble the lens connector as follows. Install the lens connector (YFE4191J100) when using a video drive ALC lens. The installation should be made by qualified ser- Connector vice personnel or system installers. Cover Automatic Iris Lens...
-
Page 15: Mounting The Lens
Mounting the Lens Caution for Mounting the Lens Caution: The lens mount should be a C-mount or CS-mount (1”- Before you mount the lens, loosen the two screws 32UN) and the lens weight should be less than 450g on the ring, and rotate this ring clockwise until it (0.99 lbs). -
Page 16: Focus Or Back-Focal Adjustment
FOCUS OR BACK-FOCAL ADJUSTMENT The following adjustment should be made by qualified 3. Tighten the screws on the back-focal adjusting service personnel or system installers. ring. 1. Loosen the screws on the back-focal adjusting Note: If the camera is connected to the Quad ring. -
Page 17: Installation Of Camera
INSTALLATION OF CAMERA • Mounting from the bottom • Mounting from the top This camera is designed to be mounted from the Remove the mount adapter from the bottom of the bottom, as shown below. The mounting hole is a camera by removing the two fixing screws. -
Page 18: Prevention Of Blooming And Smear
PREVENTION OF BLOOMING AND SMEAR When the camera is aimed at a bright light, such as a Smear spot light, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera Bright object should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming. -
Page 19: Specifications
C-mount or CS-mount selectable −10°C - +50°C (14°F - 122°F) Ambient Operating Temperature: Ambient Operating Humidity: Less than 90% Power Source and WV-BP330: 220-240V AC 50 Hz, 4.5W Power Consumption: WV-BP332: 12V DC, 250 mA WV-BP334: 24V AC 50 Hz, 3.5W... -
Page 20: Standard Accessories
Dimensions (without lens): 67 (W) x 55 (H) x 123 (D) mm [2-5/8” (W) x 2-3/16” (H) x 4-13/16” (D)] Weights (without lens): WV-BP330: 0.635kg (1.40lbs) WV-BP332: 0.445kg (0.98lbs) WV-BP334: 0.470kg (1.04lbs) Weights and dimensions indicated are approximate. Specifications are subject to change without notice. - Page 21 Matsushita Electric Industrial Co., Ltd. Osaka, Japan http://www.panasonic.co.jp/global/ N0103-5043 YWV8QA4917FN Printed in Japan N 30 Gedruckt in Japan Imprimé au Japon 2003 © Matsushita Electric Industrial Co., Ltd. All rights reserved. Impreso en Japón...