Table of Contents
Advertisement
11.
When the settings are completed, the color of the background of the address box changes to white. Confirm
that "Website Identification" is displayed after clicking the key mark on the right side of the address bar.
Note
•
If you cannot access with this method it may be because of proxy server settings. Ask the network
administrator.
IMPORTANT
•
When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of
images may be lower.
12.5 Access the camera using the HTTPS protocol
(for CA Certification)
1.
Start up the web browser.
2.
Enter the IP address of the camera in the address box of the browser.
•
Example of entry: https://192.168.0.10/
IMPORTANT
•
When the HTTPS port number is changed from "443", enter "https://IP address of the camera + :
(colon) + port number" in the address box of the browser.
(Example: https://192.168.0.11:61443)
•
When the camera is in a local network, configure the proxy server setting of the web browser (under
[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.
3.
Press the [Enter] key on the keyboard.
→
The "Live" page will be displayed.
When the security alert window is displayed, install the security certificate. (®page 162)
When "On" is selected for "User auth.", the authentication window will be displayed before displaying
live images for the user name and password entries.
IMPORTANT
•
When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of
images may be lower.
12 Configuring the network settings [Network]
Operating Instructions
161
Advertisement
Table of Contents
