Table of Contents
Advertisement
10 Configure the basic settings of the camera [Basic]
10.5.4 Installation of the certificate issued by CA
IMPORTANT
•
If the CSR file is not generated, it is impossible to install the certificate (security certificate) issued by
CA.
•
For the installation, the certificate issued by CA is required.
1.
Click the [Browse...] button of "CA Certificate - Certificate install".
→
The [Open] dialog box will be displayed.
2.
Select the certification file and click the [Open] button. Then, click the [Execute] button.
→
The certification will be installed.
Note
•
The host name registered in the installed certificate will be displayed on "CA Certificate -
Information". Depending on the status of the certificate, the following are displayed.
Invalid
[Host name of the certificate]
Expired
•
When the [Confirm] button is clicked, the registered information of the installed certificate will be
displayed in the "CA Certificate - Confirm" dialog box. (Only "Organizational Unit" will be displayed
with an asterisk (*).)
•
When the [Delete] button is clicked, the installed server certificate will be deleted.
•
When "On" is selected for "Additional info for detecting alteration", it is impossible to delete the
certificate issued by CA.
•
To change (or update) the certificate issued by CA, perform step 1 and 2.
IMPORTANT
•
Before deleting the valid certificate (security certificate), confirm that there is a backup file on the PC
or another media. The backup file will be required when installing the certificate again.
•
The expiration date of the certificate issued by CA can be checked by double-clicking the server
certification file issued by CA.
66
Operating Instructions
Indication
Description
The server certification is not installed.
The certificate has already been installed and
validated.
The certification has already expired.
Advertisement
Table of Contents
