Scanning The Original At A Certain Width - Ricoh IM CW2200 User Manual

3. Copy
4. Enter the length to cut the roll paper, and the press [OK].
5. Place the original.
page 57 "Basic Procedure for Copying Documents"
The original is fed into the machine automatically, and copying starts. If the original is not fed
automatically, press [Start].
• The minimum cut length is 210 mm (8.3 inches), and the maximum length is 33,000 mm (1299.2
inches) for plain paper of 841 mm (34 or 36 inches) or more in width. For other paper, the
maximum length is 3,600 mm (141.8 inches). If the length you specify exceeds the maximum, the
paper will be fed in at a slant, resulting in poor copy quality and wrinkled paper.
• When copying originals that are larger than A0 (E), make sure that there is enough ink to finish the
job. If the ink runs out while copying, and new ink is added, copying starts from the beginning, not
from where it stopped.
• When copying originals that are larger than A0 (E) onto two or more sheets of paper, it takes time
until the next copy starts.

Scanning the Original at a Certain Width

The machine scans using a predetermined width, regardless of the actual width of the original (Wide
Scan).
You can copy a custom size original without specifying its horizontal and vertical sizes.
64