Ricoh IM CW2200 User Manual page 203

Condition
Some icons are not
displayed when the
machine is turned on.
Only some of the menu
items are displayed
when you press
[Settings] after turning on
the power of the
machine.
The login screen is
displayed.
The User Code entry
screen is displayed.
A function is not
executed, or you cannot
perform an operation.
Cause
The functions other than the
copy function are starting
up.
The functions other than the
copy function are starting
up.
Basic Authentication,
Windows Authentication, or
LDAP Authentication is
specified.
User Code authentication is
specified.
Another function that cannot
be used with the specified
function at the same time is
being executed.
When the Machine Cannot Be Operated
Solution and reference
The time required for a function to start up
varies depending on the function. Wait a
while.
The time required for a function to start up
varies depending on the function. More
items on the menu in [Settings] are
displayed as the functions start up. Wait a
while.
Enter the login user name and password,
and then press [Login]. For the login user
name and password, consult the user
administrator.
page 48 "Logging In from the Control
Panel"
Enter the User Code, and press [OK].
Consult the user administrator for the user
code.
Wait for the function in progress to end,
and then perform the next operation. For
details about functions that cannot be used
at the same time, see the following section:
page 285 "Function Compatibility"
When a backup of the address book is
being created using Web Image Monitor
or another method, the next function is
executed after the backup is completed.
201