Table of Contents
Advertisement
16.
Lift bar A up and hook it.
1
1. Bar A
17.
Lower the paper input location cover.
18.
When a message appears that confirms that bar A has returned to the correct position,
press [Exit].
19.
Check if the settings on the screen are correct, and then press [Start Feed].
If the paper type and thickness are different from those displayed, press [Change Settings].
Select the proper items according to the paper type and thickness you want to use, and then press
[OK].
If you want to cut the edge of the paper, press [Cut End of Paper], and then select [Yes].
D0CWIA0412
D0CWIA0038
Loading Paper into the Paper Input Location
155
- Quick Links:
- Table of Contents
- Setting the Output Basket
Hide quick links:
Advertisement
Table of Contents
