Placing Rolled Originals - Ricoh IM CW2200 User Manual

2. Getting Started
• See "When Paper or an Original Is Jammed", User Guide (Full Version).

Placing Rolled Originals

When placing rolled originals, you can use the output basket.
1. Check that the output basket is in basic mode.
2. Adjust the original guides to the original size.
3. Place the trailing edge of the rolled original on the output basket.
4. Pull the leading edge of the original up to the original table with the side to be scanned
facing down.
5. Using both hands, carefully insert the original between the original guides.
• When loading long originals, use both hands to support the original as it feeds until half of it is
scanned so feeding is not interrupted.
• Do not apply excessive force to the output basket.
• For details about how to use the output basket, see page 22 "Setting the Output Basket".
56
D0CWIA0404
D0CWIA0406