Ricoh IM CW2200 User Manual page 158

8. Adding Paper and Ink
If the paper loading settings screen does not appear, open, and then close the paper input location
cover.
If the paper roll is not fed correctly and it is rewound, remove the paper roll and set it again.
20. Make sure that the size of the paper that is loaded is displayed correctly on the [Printer]
screen.
"Ready" appears on the screen.
• When [Film: Matte] is specified for the paper type or when [Prevent Paper Abrasion] is specified,
load the paper, and then specify the paper abrasion setting in [Settings]
[Machine]
you specify [Film: Matte] for Paper Type, the Prevent Paper Abrasion setting is automatically
selected, and you cannot change it. For details about Prevent Paper Abrasion, see below.
• See "Machine", User Guide (Full Version).
• When the settings in Step 19 are finished, the machine pulls the paper inside, and paper is output
about one meter (40 inches) from the paper output location. Then the machine rewinds the paper
to the prescribed position. Do not touch the output paper until the machine stops moving. If you
select [Yes] in Step 19, the edge of the paper is cut off.
• If you insert a roll of paper into the machine at an angle or if there is space between the paper and
the flanges, the paper may not be pulled into the inside of the machine. If that happens, return to
Step 2 and start again.
• When loading two paper rolls into the paper input locations 1 and 2, make sure that [ ] is
displayed at the paper input location you loaded first on the "Paper Input Location" of [Check
Status] [Machine Information], and then load the other paper roll into the other paper input
location.
• When the [Touch/Notification Sound] is set to [No Sound], it will not sound if you insert paper into
the paper input location. For details about [Touch/Notification Sound], see below.
• See "Sound", User Guide (Full Version).
• When printing from a computer, see page 163 "Specifying Custom Sizes".
• You can specify the types of paper you load in the paper input location in advance. For details, see
below.
• See "Paper Input Location/Paper Setting", User Guide (Full Version).
• For details about the settings for the paper thickness and types, see below.
• See "Paper Input Location/Paper Setting", User Guide (Full Version).
• For details about how to store the paper roll, see below.
• page 166 "Recommended Paper Sizes and Types"
• If you load an empty spool, but you do not feed paper soon after that, press [Cancel Feed] to close
the screen if the paper loading settings screen appears.
156
[Print Action/Image Quality Adjustment]
[System Settings]
[Prevent Paper Abrasion]. However, if