Ricoh IM CW2200 User Manual page 116

5. Scan
When the screen shown above is displayed, fill in the sheet as follow:
Computer name
[1]
DHCP server enable/disable setting
IP address
5. Enter "set user" and press the [Enter] key.
Enter a space between "set" and "user".
6. Check the domain name, workgroup name and login user name, and write down the
information in [2] on the check sheet.
When the screen shown above is displayed, fill in the sheet as follow:
Domain name/workgroup name
[2]
Computer login user name
"USERDNSDOMAIN" is not displayed when the login user who executed the command is a local
user.
7. Check the login password on the computer, and write down the information in [3] on the
check sheet.
The required information on the computer is confirmed. Now create a shared folder on your
computer and specify the access permissions of the folder.
• Depending on the operating system or security settings, it might be possible to specify a user name
that does not have a password assigned. However, we recommend that for greater security you
select a user name that has a password.
114
LAPTOP-5955S09U
No
192.168.0.152
CKX007
USERDNSDOMAIN
[ abcd-net.local
USERDOMAIN
[ ABCD-NET
TYamada
DZC523
]
]
DZC524