Ricoh IM CW2200 User Manual page 220

9. Troubleshooting
Message
"Paper size and type
are mismatched."
"Change the setting
to continue the
current job or press
[Job Reset]."
"Printer font error."
"Print overrun."
"Receiving data
failed."
"Sending data
failed."
"The selected paper
size is not
supported. This job
has been
cancelled."
218
Cause
The paper input • To cancel printing, press [Cancel Printing].
location loaded
• To proceed with printing on the specified paper,
with paper of the
size or type
specified in the
printer driver is not
available.
There is a problem Consider repairing the machine.
in the font file of the
machine.
A page image is Decrease resolution under [Others]
discarded while Settings]
printing the page. the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
Transmission of Send the data again.
data was canceled.
Transmission of Check that the computer is operating normally.
data from the
printer driver was
canceled.
A paper size that Print the document on paper of a size that can be fed
cannot be fed on on the machine.
the machine was
specified and
printing was
canceled by the
auto job cancel
function that was
activated.
Solution and reference
load the paper and then check that the paper size
and type are correctly specified in [Settings]
[Paper Input Location/Paper Settings].
page 143 "Loading Paper into the Paper Input
Location"
[Image Quality]
[Special
[Image Smoothing] in