Ricoh IM CW2200 User Manual page 219

Message
"Information for user In LDAP
authentication is authentication, the
already registered same name is
for another user." registered under
different IDs on
different servers,
and duplicate
names (account
names) occurred
such as when
switching the
domain (server).
"Insufficient The amount of
Memory" available memory is
insufficient.
"Load following The paper input
paper in XXX." location specified in
the printer driver
(XXX indicates the
has no paper
paper input location
loaded.
name)
"Memory Retrieval The data in the
Error" memory could not
be retrieved.
"No response from In LDAP or
the server. Windows
Authentication has authentication, a
failed." timeout error
occurred while
submitting an
authentication
query to the server.
When a Message Appears While Using the Printer Function
Cause
Consult the user administrator. User administrator:
Delete the corresponding user from the address book,
and register the user again after resolving the duplicate
names on different servers.
Decrease resolution under [Others]
Settings]
the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
• To proceed with printing on the specified paper,
load the paper in the paper input location.
page 143 "Loading Paper into the Paper Input
Location"
Turn off the power of the machine, wait for 10 seconds
or more after confirming that the main power indicator
is turned off, and then turn on the power.
page 11 "Turning On and Off the Power"
• Consult the administrator of the authentication
server.
• When using the Active Directory of the Windows
server for LDAP Authentication, change [Settings]
[System Settings]
[Authentication/Charge]
Authentication/User Authentication/App Auth.]
[LDAP Search]
Server" to [Inactive].
Solution and reference
[Image Quality] [Image Smoothing] in
[Settings for Administrator]
[Administrator
"Follow Referrals on LDAP
[Special
217