Ricoh IM CW2200 User Manual page 209

Message
"Please wait."
"Please wait."
"Shutting down... Please
wait. Main power will be
turned off automatically.
Maximum waiting time: 3
minute(s)"
• If the message persists even after you have performed the operations as instructed in the following
message, a malfunction may temporarily occur on the machine. Turn off the power of the machine,
wait for 10 seconds or more after confirming that the main power indicator is turned off, and then
turn on the power.
When a Message Appears and the Machine Cannot Be Operated
Condition
The machine is
preparing to perform a
function or executing the
image stabilization
process.
The ambient
temperature is outside
the temperature range
specified for the
machine operation.
Ink replenishment, etc.
was performed.
The power of the
machine was turned off
while the machine was
starting up or in the
standby mode.
Solution and reference
Wait a while and do not turn off the power of
the machine.
Check the room temperature and whether it
satisfies the operational requirements of the
machine. If the machine has just been moved
to the current location, leave it be for some
time and allow it to adapt to the environment
before use.
See "Installation Requirements After Moving
the Machine", User Guide (Full Version).
If the message persists after 10 minutes even
when the room temperature is within the
specifications, wait for 10 seconds or more
after confirming that the main power indicator
is turned off, and then turn on the power.
page 11 "Turning On and Off the Power"
Wait a while and do not turn off the power of
the machine. Turn off the power of the machine
if the message persists after 10 minutes, wait
for 10 seconds or more after confirming that
the main power indicator is turned off, and
then turn on the power.
page 11 "Turning On and Off the Power"
Wait until the power is turned off.
207