Ricoh IM CW2200 User Manual page 239

Message
"Authentication has
failed."
B/W/L0103-000
"Authentication has
failed."
B/W/L0104-000
"Authentication has
failed."
B/W/L0206-002
"Authentication has
failed."
B/W/L0206-003
Cause
An operation in the
TWAIN supporting
application was
performed from the
computer while a user
was logged in to the
machine or performing
the login procedure.
An incorrect password
was entered.
The Driver Encryption
Key is not registered
correctly in the TWAIN
driver.
An incorrect login user
name or password was
entered.
A user has attempted to
log in to the functions
that can be accessed
only by the
administrator such as
[Settings] when
[Application
Authentication
Management] is
specified.
":" or another character
that cannot be used in a
login user name was
entered.
When Other Messages Appear
Solution and reference
Check whether another user is logged in to the
machine, and then perform the operation.
Enter the correct password.
Consult the network administrator whether the
Driver Encryption Key is required, and
configure the driver accordingly.
See "Specifying Login Information in the Printer
Driver", User Guide (Full Version).
The network administrator can check the
setting of "Driver Encryption Key: Encryption
Strength" in [Settings] [System Settings]
[Settings for Administrator]
[Extended Security Settings].
Enter the correct login user name and
password.
The user needs to log in from the application
login screen.
• Enter the correct login user name.
• Change the user name if it contains a
space, ":" or other unusable characters.
[Security]
237