1.20
How To Show/Hide The Color Bar
The color bar appears at the left edge of the display, and shows the echo color scale
in use. The strongest echo color is at the top of the scale and weakest echo color is at
the bottom.
To show/hide the color bar, click the [Display] icon (
to show the [Display] menu, then click the [Color Bar] icon (
green color when the bar is shown.
1.21
How to Set, Show and Hide Alarms
The FSS-3BB has six alarms: Bottom Alarm, Fish Alarm, Bottom Fish Alarm, Tem-
perature Alarm, Fish Size Graph Alarm, and IDENTI-FISH
When an alarm is set and the alarm conditions are met, the system releases an audi-
ble beep and the applicable alarm icon appears at the bottom-right corner*. To silence
the audible beep, click anywhere on the screen. The alarm icon remains on the display
until the cause of the alarm is removed or the offending alarm is disabled.
* If the depth indication is shown at the bottom-right corner, the alarm icon appears at
the bottom-left corner.
: Bottom Alarm icon
: Fish Alarm icon
Alarm descriptions
• Bottom Alarm: Alerts you when the seabed (bottom) enters the range set for this
alarm.
• Fish Alarm: Alerts you when fish are detected within the range set for this alarm.
• Bottom Fish Alarm: Alerts you when fish are detected within the range set for this
alarm.
• Temperature Alarm: Alerts you when the water temperature is within range or out
of range, depending on your selection. This alarm requires water temperature data.
• Fish Size Graph Alarm: Alerts you when the selected fish size graph bar is "1st
peak" and the specified distribution rate is exceeded. Valid only when the fish length
graph is displayed.
• IDENTI-FISH
similarity. Valid only when the IDENTI-FISH
: Bottom Fish Alarm icon
: Temperature Alarm icon
™
Alarm: Alerts you when the selected model data exceeds the set
) from the InstantAccess bar™
). The icon changes to
™
alarm.
: Fish Size Graph Alarm icon
: IDENTI-FISH Alarm icon
™
graph is active.
1. OPERATION
1
1-27