Display Color Scheme Mode; Display Mode - Furuno FCV-600 Operator's Manual

1.4

Display Color Scheme Mode

The display color scheme mode can be changed according to the operating environ-
ment, such as daytime or nighttime. Depending on the mode, the window background
color, text color, gain, and operation panel brilliance change.
1. Press the
window automatically closes if there is no key operation for approx. six seconds.
2. Press  or  to select background display mode.
Day mode (background shown as white)
3. Press the KNOB or MENU/ESC key to close the window.
1.5

Display Mode

The unit has four basic display modes (single frequency, dual-frequency, zoom and
navigation). By combining these modes, a variety of screens can be displayed. See
subsection 1.5.6 for details on how to combine the displays.
The display mode is selected from the [Mode] window. The factory default setting is
set as shown in the table below. The display in the [Mode] window varies depending
on the type of transducer connected to the unit and its settings.
Transducer
Type
XDR: CHIRP
XDR: CW (L/H)
*: L, M, or H is entered depending on the type of connected transducer.
key to show the [Brilliance/ Panel Dimmer] adjustment window. The
Default settings of [Mode] window (for FCV-600)
[Mode] window
Mode1: CHIRP (*)
Mode2: CHIRP (*) BL
Mode3: BL/ CHIRP (*)
Mode4: NAV4/ CHIRP (*)
Mode5: NAV2/ CHIRP (*)
Mode6: Off
Mode7: Off
Mode1: CW (H)
Mode2: CW (L)
Mode3: CW (L)/ CW (H)
Mode4: BL/ CW (H)
Mode5: BL/ CW (L)
Mode6: NAV4/ CW (H)
Mode7: NAV2/ CW (L)
Night mode (background shown as balck)
Abbreviation
CHIRP: CHIRP transducer
L: Low frequency
M: Medium frequency
H: High frequency
BL: Bottom lock
NAV: Navigation (split into
2:2 or 4:4 display)
CW: CW transducer
H: High frequency
L: Low frequency
BL: Bottom lock
NAV: Navigation (split into
2:2 or 4:4 display)
1. OPERATION
1
1-3