Furuno FSS-3BB Operator's Manual page 68

2. GRAPH FUNCTIONS
SIZE1 - SIZE3 menu
The following menu items change according the measurement mode.
• [Specific Area] measurement mode: Since the [SIZE2] and [SIZE3] menus are en-
abled, the fish length graph can be set individually. For example, the [SIZE2] fish
length graph is set in the [SIZE2] menu.
• Measurement mode other than [Specific Area]: The menu settings for the [SIZE1]
menu are reflected to the fish graph.
1. Click the [Advance Settings] icon (
icon (
2. Click [Fish Size] to show the [Fish Size] settings on the right-side of the window.
FSS-3BB[0252470-xx.xx]
3. Referring to the table below, select the measurement option to change, then
change the settings as required.
Menu item
[Graph Scale End]
[Distributed Scale Start] Sets the percentage of distribution at which data starts appearing on the
[Distributed Scale End]
[Graph Peak]
[Emphasis Type]
[Offset]
4. Click the [OK] button to save settings and finish, or click the [Cancel] button to re-
store previous settings and escape.
2-20
) to show the [Advanced Settings] menu.
Sets the maximum fish size to
be displayed on the graph.
graph. (See the above figure.)
Sets the percentage of distribution at which data stops appearing on the
graph. (See the above figure.)
[1st]: Shows only the highest peak measurement.
[1st + 2nd]: Shows the two highest peak measurements.
[1st + 2nd + 3rd]: Shows the three highest peak measurements.
Set the number of peak measurement to display on the graph.
Sets the degree of peak emphasis, among the following options. The larger
the number, the longer the bar that shows peak
• [Off]: Disable peak emphasis processing.
• [Type 1]: Emphasize small peaks centering on 1st peak.
• [Type 2]: Each peak is emphasized, multiple peaks are separated and
emphasized.
• [Type 3]: Emphasize large peaks centering on 1st peak.
Compensates for error in displayed fish size. For example, if the displayed
value is smaller than the actual value, enter a positive value.
) on the InstantAccess bar™, then click the
Description
[ Distributed [ Distributed
Scale End ] Scale End ]
[ Distributed [ Distributed
Scale Start ] Scale Start ]
Vertical Scale Settings
[ Graph Scale End ] [ Graph Scale End ]