Table of Contents
Advertisement
2. GRAPH FUNCTIONS
2. Click [ID1] or [ID2] as applicable.
FSS-3BB [ 0252470-xx.xx ]
3. Click the
dow.
Note: If [Select Fish Specie1] cannot be selected, turn off [Reference Auto Select]
in the same menu.
4. Use the drop-down list to select fish species (selected at step 8 in section 2.2.2).
Select fish specie drop-down list
5. Select the model data to use for similarity calculation. You can select (checkmark
) a maximum of three.
The factory default model data saved to the system are [Mackerel] and [Herring].
• [Default Mackerel_CM265LHG.ref]: Mackerel model data used by the transduc-
er CM265LHG.
• [Default Mackerel_CM599LHG.ref]: Mackerel model data used by the transduc-
er CM599LHG.
• [Default Herring_CM265LHG.ref]: Herring model data used by the transducer
CM265LHG.
• [Default Herring_CM599LHG.ref]: Herring model data used by the transducer
CM599LHG.
6. Click the [OK] button.
The name selected at step 4 appears in [Select Fish Specie1].
2-6
button at [Select Fish Specie1] to show the [Select Fish Specie1] win-
Do not check more than
three. The selections in the
window will be greyed out.
Advertisement
Table of Contents
Troubleshooting
