Furuno FSS-3BB Operator's Manual page 77

3. Referring to the table below, set the appropriate file filters, then click [OK].
Filter type
[Specify Date] Apply a filter based on date. You can select a single filter (for exam-
ple, filter by month only) or a mixed filter (for example, filter by year,
month and date).
[Specify Position] Apply a filter based on a specific location and/or a nautical mile ra-
dius from the specified point.
[Sort Recordings] Apply a filter based on the playback time of the record, the depth re-
corded, or a mix of time and depth.
• [Minimum Time]/[Minimum Depth]: Records with a time/depth be-
low this setting are not displayed.
• [Maximum Time]/[Maximum Depth]: Records with a time/depth
above this setting are not displayed.
4. Select the file to play back, then click [OK]. The selected file is played back. Some
settings, such as gain and fish size measurements, can be adjusted during play-
back.
No. Name
1 [Pause] icon
2 [Stop] Icon
3 [Settings] icon
4 [Loop] icon
5 [Playback Location]
indicator
6 [Playback Speed]
5. Click the [Stop] icon (
3. SCREENSHOTS & DATA RECORDING
Description
2015/10/17
14:10:40
Description
Select to pause the playback. Click the [Play] icon to re-
sume playback.
Select to stop the playback.
Apply your current settings to the playback file. This icon is
shown in green color when in use.
Select to loop the playback.
Indicates your current location in the overall playback. Se-
lect the slider bar, then drag the locater to change the play-
back location.
Select the speed to use to play back the recording. The
available options are:
• [2000]/[1500]/[1000]/[500] ms: Play the record at the set
millisecond speed.
• [RT]: Play the record at real time speed (the speed at
which it was recorded).
• [MAX]: Play the record at maximum playback speed.
) to stop the playback.
2015/10/17 08:09:51
3
3-7