How To Set Model Data - Furuno FSS-3BB Operator's Manual

3. Click the
Software keyboard button
4. Click the software keyboard button ( ) to show the software keyboard.
Upper case
5. Use the keyboard to enter name of the fish species. You can use a maximum of
15 alphanumeric characters. The name entered here is reflected to the [Save ID1
(ID2) Data] window.
6. Click the [OK] button. The message "This will overwrite a previously saved fish
type. Are you sure?" appears.
7. Click the [Yes] button to confirm data and close the [Fish Species List] window.
8. Click the [OK] button to finish.
2.2.4

How to set model data

Set the model data to be compared with the IDENTI-FISH
surement range. ID1 and ID2 model data can be set individually. There are two meth-
ods to set model data.
• Set three fish species to compare.
• Set four or more fish species to compare.
Set three fish species to compare
Set the fish type in [Select Fish Specie1] to [Select Fish Specie3]. The similarity of the
fish species set here is displayed on the IDENTI-FISH
1. Click the [Advanced Settings] icon (
the [Advanced Settings] icon (
button at [Fish Species List] to show the [Fish Species List].
Click
[A/a]
) to show the [Advanced Settings] window.
2. GRAPH FUNCTIONS
Lower case
™
echo display in the mea-
™
graph.
) from the InstantAccess bar™, then click
2
2-5