Furuno FSS-3BB Operator's Manual page 96

4. ADVANCED SETTINGS
How to add a mode
You can have a maximum of eight modes. To add a mode, do the following:
1. With the [Mode] menu displayed, click the applicable (
mode number. The screen should look something like the one shown below.
Display division
window
Mode select
window
2. For two or more screens in a mode, select desired display orientation from the
[Display Division] drop-down list. The choices are [Vertical], [Horizontal] and
[Complex]. See Appendix 2 for the layout available with each screen division.
3. From the [Mode Select] window, select up to five items to display on the mode se-
lected The choices are outlined in the table below.
[Mode Select]
window items
[---]
[HF]
[HZM]
[LF]
[LZM]
[ID]*
*Not shown when [External IDENTI-FISH Echo Window] is set to [On] (at installa-
tion).
4. Click [OK] to apply the changes to the mode selected at step 1 and close the
menu. Click [Cancel] to cancel any changes made and close the menu.
4-18
[Mode Select] window items
Description
No selection.
Adds the high frequency display.
Adds the high frequency zoom display.
Adds the low frequency display.
Adds the low frequency zoom display.
Adds the IDENTI-FISH
) button of an empty
Mode configuration
window
™
display.