How To Delete Screenshot Files; Echo Data Recording And Playback; How To Record Echo Data - Furuno FSS-3BB Operator's Manual

3.1.6

How to delete screenshot files

You can delete screenshot files in two manners: individually, or all at once.
How to delete a single screenshot file
1. Long-push the scrollwheel on the Trackball Control Unit to show the screenshot
replay screen.
2. Press the arrow buttons (
3. Click the [Delete] (
How to delete all screenshot files (internal files only)
1. Long-push the scrollwheel on the Trackball Control Unit to show the screenshot
replay screen.
2. Click the [Delete All] (
sure to delete all screenshot files.
3. Click [Yes] to proceed with the file deletion. Click [Cancel] to abort the file deletion.
3.2

Echo Data Recording and Playback

The echo data recording and playback function requires connection to an external
memory device. Echo data is recorded as a "movie", allowing you to playback previ-
ously recorded echo data. This is useful for re-viewing a school of fish and registering
model data for the IDENTI-FISH
3.2.1

How to record echo data

To start data recording, click the [Echo Recording] menu icon from the InstantAccess
bar™, then click the [Record] icon. To stop the recording at any time, click the [Stop]
icon.
The amount of memory used for recording echo data varies, depending on configura-
tion and settings. For example, if the range is 150 m and the single display is used,
recording will be done at approximately 4.7 GB/hour
Note 1: An external memory device with 500 GB capacity, or higher, is recommended
for this function.
Note 2: When there is no external memory device connected, the [Echo Recording]
icon is not selectable.
3. SCREENSHOTS & DATA RECORDING
or ( ) to select the file to delete.
) icon at the bottom-right corner to delete the screenshot file.
) icon at the bottom-right corner. You are asked if you are
™
graph.
Record icon Record icon
Stop icon Stop icon
3
3-5