Furuno FSS-3BB Operator's Manual page 56

2. GRAPH FUNCTIONS
7. Click the [OK] button.
The numeric value selected at step 6 is displayed in [Select Reference (Auto)].
8. Repeat steps 4 to 7 to set another model data. (A maximum of three for each fish
species for a total of 27.)
Use the [Cancel] button to cancel changes.
9. Click the [OK] button.
Use the [Cancel] button to cancel changes.
How to delete unnecessary model data
1. Click the [Advanced Settings] icon (
the [Advanced Settings] icon (
2. Click [IDENTI-FISH].
3. Click the
ta] window.
4. Use the drop-down list to select the fish species that contains the model data to
delete.
5. Select the model data to delete. (Multiple deletion is possible.)
6. Click the [Delete] button. The message "Selected model data will be deleted. Are
you sure?" appears.
7. Click the [Yes] button.
8. Click the [Close] button to close the [Delete Reference Data] window.
9. Click the [OK] button to finish.
2-8
) to show the [Advanced Settings] window
button at [Delete Reference Data] to show the [Delete Reference Da-
) from the InstantAccess bar™, then click