Furuno FSS-3BB Operator's Manual page 60

2. GRAPH FUNCTIONS
[ID1]/[ID2] menu
1. Click the [Advanced Settings] icon (
the [Advanced Settings] icon (
2. Click [ID1] or [ID2].
FSS-3BB [ 0252470-xx.xx ]
3. If necessary, adjust settings, referring to the table on the next page.
[Select Fish Specie1] -
[Select Fish Specie3]
[Draw Method]
[Reference Auto Select]
[Select Reference (Auto)]
[Offset]
[Updating Cycle]
[Selected Area Scroll]
[Measurement Range]
4. Click the [OK] button to confirm settings, or [Cancel] to restore previous settings.
2-12
Item
Effective when [Reference Auto Select] is turned on. Set
fish species with [Select Fish Specie1] -
[Select Fish Specie3]. See section 2.2.3.
Effective when [Reference Auto Select] is turned off. Set
the method by which to draw the echo histogram.
• [Average]: Averages the model data selected for each
fish species and displays a histogram of average value.
• [All]: Displays a histogram of all selected model data.
Turn this item on to get automatic selection of the three
fish species with the highest similarity among the fish spe-
cies set in [Select Reference (Auto)] below.
Effective when [Reference Auto Select] is turned on. Set
the fish species. See page 2-5.
Corrects the histogram of the IDENTI-FISH
play. For example, if there is a difference from the model
data at the time of factory shipment, or if the measure-
ment results gradually deviate from the histogram of the
model data, enter an offset to compensate for the devia-
tion.
Sets the interval at which to update the IDENTI-FISH
graph.
Turn this item on to scroll the measurement range accord-
ing to the sounder display.
Sets the range for measuring school of fish.
[Standard]: Measure to the seabed.
[Entire Range]: Measure the entire range including the
depth below the seabed.
Since measurement of the IDENTI-FISH
performed below the seabed, the echoes from schools of
fish may be mistaken for the seabed, which can affect
measurement results and accuracy. If this occurs, use
[Entire Range].
) from the InstantAccess bar™, then click
) to show the [Advanced Settings] window
Description
™
echo dis-
™
™
graph is not