Symbol MK1000 Product Reference Manual page 79

Table 3-5. System Configuration Menu Definitions (Continued)
Field Name
Debug Mode
Embedded Apps
Setup and Installation: Communication
Description
The Debug option can be used by programmers to
allow dumping output from their programs to either
a Serial port, or through a Telnet connection. If
Serial port is selected, the output goes to the Com/
Scanner port. (For programmer's, that's
C_SID_IO_UART1.) While debugging using the
Serial port, that port cannot be used by the user's
application for any other purpose.
The default Debug Mode for the MK1000 is
DISABLED.
Toggle this field by pressing the Enter button.
Enabling Embedded Apps allows the PCK
emulation to run or, if configured, the built in Demo
and Factory Test programs. Disabling Embedded
Apps allows a downloaded user application to
operate without interference from any application
programs that are embedded.
The default Embedded Apps value for the MK1000
is ENABLED.
3-33