Udp/Ip Configuration - Symbol MK1000 Product Reference Manual

MK1000 MicroKiosk Product Reference Guide

UDP/IP Configuration

When Change Host Config is selected at the PCK Configuration menu, the system
automatically displays the current host type. If UDP/IP is the current host type, the following
screen displays for UDP/IP configuration.
Scan the number "1" bar code to enable or disable DHCP. (For a list of MK1000 supported
DHCP options, see
Gateway, or DNS configuration, scan the number "2", "3", "4", or "5" bar code to display the
respective screen. Scan the number "6" bar code to display the second UDP/IP screen.
To change the Server Host IP, or Server Host Port, scan the number "1" or "2" bar code to
display the respective screen. Scan the number "3" to return to the previous screen.
3-20
UDP/IP Configuration Page 1
1. DHCP Enabled:
2. IP Address:
3. Subnet Mask: 255.255.255.0
4. Gateway:
5. Go to DNS Screen
6. Go to Page 2
Scan Item Number to Edit
Figure 3-18. UDP/IP Configuration Page 1
Appendix H, DHCP
Figure 3-19. UDP/IP Configuration Page 2
No
192.168.0.2
255.255.255.255
Options.) To change the IP Address, Subnet Mask,