Symbol MK1000 Product Reference Manual page 213

Problem
(continued)
MK1000 will not communicate
over a wireless-Ethernet
connection.
12. Parameter changes made to
the MK1000 are not saved/
retained after exiting the
menu screens.
Table F-1. Troubleshooting (Continued)
Possible Causes
Troubleshooting
Possible Solutions
5. Save ALL changes made and
EXIT the System menu.
- Scroll the cursor down to Save &
Reboot by pressing the '3' button
three times.
- With the cursor on Save & Reboot,
press '4' (System menu is exited, all
changes made are saved, and the
unit reboots as described in
Troubleshooting Note 1.)
The unit may have an INI type
configuration file loaded in RAM.
This static file is referenced to set
certain parameters when the unit is
powered up such as an IP Address.
- Press the '4' and '1' buttons on the
unit simultaneously (an Enter
Password screen appears).
- Type in '44213' (System menu
screen appears).
- With the cursor (<) on System,
press '4' (System Configuration
screen appears).
- Scroll the cursor down to File/DBM
by pressing the '3' button three
times.
- With the cursor on File/DBM, press
'4' (File Sys/DBM Management
screen appears).
- With the cursor on Delete Files,
press '4' (any files loaded in RAM
are deleted) and the unit
automatically reboots itself.
- The unit now saves and retains
parameter changes.
F-15