Table of Contents
Advertisement
MK1000 MicroKiosk Product Reference Guide
Problem
(continued)
How do I determine the
MK1000's current OS version?
6. How do I confirm my MK1000
is communicating with my
host computer?
F-4
Table F-1. Troubleshooting (Continued)
Possible Causes
(Not applicable)
Possible Solutions
To exit the System menu WITHOUT
saving any changes:
- Press '1' (System Configuration
screen appears).
- Press '1' (System menu appears).
- Press '1' (System menu is exited,
changes are NOT saved, and the
original settings are retained as
described in Troubleshooting Note
1).
A PING command can be used to
confirm ethernet communication
between the host computer and
MK1000.
- From the Command / DOS prompt,
type Ping followed by the MK1000
IP address, and then press Enter.
The command looks like the
following: "Ping 192.168.0.1". In this
example, 192.168.0.1 is the
MK1000's IP address. For
instructions on how to determine
your MK1000's IP address see the
troubleshooting topic
determine the MK1000's IP
Address?
-
A successful PING (proving
communication exists) results in
a message like, "reply from
192.168.0.1 ...". In addition,
PING statistics will show packets
sent to the MK1000 were
RECEIVED.
(continued)
# 9. How do I
Advertisement
Chapters
Table of Contents
