Symbol MK1000 Product Reference Manual page 106

MK1000 MicroKiosk Product Reference Guide
Table 3-22. RS-485 Config Screen Definitions (Continued)
Field Name
Parity
Data (Bits)
Stops (Bits)
Flow (Control)
Echo (Mode)
3-60
Description
Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select Parity.
The default Parity for MK1000 RS-485 port settings
is NONE.
Available Parity settings: NONE, ODD, or EVEN.
Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Data Bits.
The default Data Bits setting for MK1000 RS-485
port settings is 8 BITS.
Available Data Bits settings: 7 BITS or 8 BITS.
Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Stop Bits.
The default Stop Bits setting for MK1000 RS-485
port settings is 1 BIT.
Available Stop Bits settings: 1 BIT or 2 BITS.
Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Flow Control.
The default Flow Control setting for MK1000 RS-
485 port settings is DTR/DSR.
Available Flow Control settings: DTR/DSR, BUSY,
NONE, or XON/OFF.
Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Echo Mode.
The default Echo Mode setting for MK1000 RS-485
port settings is OFF.
Available Echo Mode settings: ON or OFF.