Symbol MK1000 Product Reference Manual page 68

MK1000 MicroKiosk Product Reference Guide
Scan the number "1", "2", "3", "4", or "5" bar code to display the appropriate screen to
change the Baud Rate, Data Bits, Stop Bits, Parity, or Flow Control respectively. (RS-485
Configuration includes an additional option, '6. Net ID'.)
Note: When you have completed entering numeric values on any screen,
scan the "Enter" bar code. Successive scans of the "Enter" bar code
return you to the main PCK Configuration menu where you must
scan "Exit PCK Config" to save changes.
If you wish to exit any screen without completing your entries, scan
the Cancel bar code to return to the parent screen. Any changes
made in the present screen are discarded.
Selecting a Baud
When Baud is selected at the RS-232/RS-485 Configuration screen by scanning the "1" bar
code located in the section
displays:
To select or change the baud rate, Scan the required numeric bar code(s) to select the new
baud. Remember to scan the Save & Exit bar code when you are finished, or scan Cancel
to escape WITHOUT completing the entry.
3-22
Numeric Bar Codes
Current Baud: 19200
Select New Baud:
1. 1200
2. 2400
3. 4800
4. 9600
5. 14400
6. 19200
Figure 3-21. Baud Rate Screen
beginning on page B-6, the following screen