Symbol MK1000 Product Reference Manual page 217

Table of MK1000 Communication Interfaces
The MK1000 supports up to four communication interfaces:
• wireless Ethernet
• wired Ethernet
• RS-485 (wired)
• RS-232 (wired).
The number and type of communication interfaces your unit has is specified by three digits
in its model number. The location of the three digits is illustrated with '???' (three question
marks) in the MK1000 model structure, MK1000-xxx???xxxxx. For a key defining the
supported onboard communication interfaces, see below.
RSE= Wired Only: All 3 wired interfaces - RS232 / RS485 / Ethernet (10Base-T)
RFR= Wired/Wireless Ready: All wired interfaces + Upgrade to RF with addition of PC Card
2M1 = Wireless Only: Frequency Hopping 2Mb Radio with 100mW radio power
2M5 = Wireless Only: Frequency Hopping 2Mb Radio with 500mW radio power
11M = Wireless Only: Direct Sequence 11Mb Radio with 100mW radio power
AL1 = Multi-Interface: all 3 wired interfaces + 2Mb wireless with 100mW radio power
AL2 = Multi-Interface: all 3 wired interfaces + 2Mb wireless with 500mW radio power
AL3 = Multi-Interface: all 3 wired interfaces + 11Mb wireless with 100mW radio power
Appendix G
G-1