Entering Field Data (Numeric Values) - Symbol MK1000 Product Reference Manual

MK1000 MicroKiosk Product Reference Guide

Entering Field Data (Numeric Values)

Data fields, such as IP Address, require the user to enter a combination of numeric values.
On the appropriate screen, enter the numeric values by scanning the bar codes that
correspond to the data you wish to enter.
For example, to enter a numeric value such as an IP Address:
1. Scan the Enter PCK Configuration Menu bar code to access the PCK
Configuration menu.
2. Ensure the communication interface is set to Ethernet. Your "current
(communication interface) host setting" is displayed on the second line of the PCK
Configuration menu.
• If your current setting is Ethernet (wired or wireless and TCP/IP or UDP/IP), no
change is necessary.
• If your current setting is not Ethernet, scan the "1" bar code to change the
interface and scan the "1" bar code again to select Ethernet.
3. Once your communication interface is confirmed, check and change the MK1000's
IP address by scanning the number "3" bar code (Change Host Config) at the PCK
Configuration menu to access the TCP/IP Configuration Page 1.
4. Scan the number "1" bar code (TCP/IP) to access TCP/IP Configuration Page 1
screen.
5. Scan the number "2" bar code (IP Address) to access the IP address data field.
This screen displays the current IP address field (Curr IP Addr) and the new IP
address field (New IP Addr).
6. To enter a new IP address, scan the numeric bar codes that correspond to the IP
address you desire. Note that the IP address field requires you to scan three digits
for each segment in the address for the segment separator "dots" to be applied
correctly (see Example: Entering a Numeric Value -- IP Address on page 3-9).
7. When you have completed scanning the IP address via numeric bar codes, scan
the Save & Exit bar code to save your changes and exit the current screen. The
MK1000 changes its IP address to the new value you entered and returns you to
the previous screen.
or
If you do not wish to change the current (IP address) setting, scan the Cancel bar
code to exit the WITHOUT saving your changes.
3-8