Symbol MK1000 Product Reference Manual page 212

MK1000 MicroKiosk Product Reference Guide
Problem
(continued)
MK1000 will not communicate
over a wireless-Ethernet
connection.
F-14
Table F-1. Troubleshooting (Continued)
Possible Causes Possible Solutions
3. Confirm the Wireless (RF)
Ethernet Setup is ENABLED.
- On the Wired/Wireless
Configuration screen (3rd line),
Enabled must = Yes.
- If Enabled = No, with the cursor
on Enabled, press the '4' button.
Enabled should now = Yes. See
Troubleshooting Note 1.
- Press '1' (Network Configuration
screen re-appears).
4. Confirm the Wired Ethernet
Setup is DISABLED.
- Scroll the cursor up to Wired
Ethernet by pressing '2'
- With the cursor on Wired Ethernet,
press '4' (Wired Ethernet
Configuration screen appears).
- On the Wried Ethernet
Configuration screen (3rd line),
Enabled must = No.
- If Enabled = Yes, with the cursor
on Enabled, press the '4' button.
Enabled should now = No. See
Troubleshooting Note 1.
- Press '1' (Network Configuration
screen re-appears).
- Press '1' (System menu screen re-
appears).
(continued)