Table of Contents
Advertisement
Procedure 5.2 - Inspecting and Adjusting Belt Tension
Procedure
1.
Remove the access cover, top cover, left and right side covers. See Procedure 7.1.
WARNING
Before continuing with this procedure, review the Warning and Caution statements listed in Sec-
tion One, Things You Should Know.
.
WARNING
If the EFX has been in recent use, the load resistors and mounting bracket may be extremely
hot.
2.
Remove the two screws that retain the black plastic shield on the left side of the EFX.
Remove the black plastic shield from the EFX.
3.
Place an automotive or equivalent belt tension gauge on the input belt as shown in Diagram
5.2.
Diagram 5.2 - Input Belt Tension Measurement
Left Side Adjustment Bolt
C534i Elliptical Fitness Crosstrainer
Page 20
Advertisement
Table of Contents
Troubleshooting
