Procedure 7.11 - Replacing A Battery - Precor C534i Service Manual

Procedure 7.11 - Replacing a Battery

1. Remove the access cover, top cover, left and right side covers per Procedure 7.1.
2. Disconnect the red wire from the positive terminal of the battery and the black wire from the
negative terminal of the battery.
3. Remove the nut that fastens the battery bracket tab and remove the battery bracket tab.
See Diagram 7.9.
Diagram 7.9 - Battery Mounting
4. Slide the old battery out of its mounting bracket.
5. Slide the replacement battery into the battery mounting bracket.
6. Replace the battery bracket tab and fasten it with the nut removed in step 3.
7. Connect the black wire, removed in step 2, to the negative battery terminal. Connect the red
wire, removed in step 2, to the positive battery terminal.
8. Check the operation of the EFX as described in Section Four.
C534i Elliptical Fitness Crosstrainer
Battery
Bracket Tab
Page 49