Precor C534i Service Manual page 33

Diagram 7.2 - Rear Cover assembly with the Access Panel Removed
5. Remove the two screws that fasten the wedge cover to the frame and remove the wedge
cover. See Diagram 7.3.
Diagram 7.3 - Wedge Cover
Wedge
Cover
6. Remove the screws that fasten the lower PCA to the front cover section. Do not remove any
of the wires or cables from the lower PCA.
7. Remove the three screws (one front and two rear) that fasten the front cover section to the
frame. See Diagram 7.4.
C534i Elliptical Fitness Crosstrainer
Snap
Mounting Screw
Mounting
Screw
Page 33