Upgrading Or Replacing The Cpu - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

Processor (CPU)
CAUTION
▶
In a system that is configured with ATD, only certain components
which support the respectively increased higher operating
temperature range may be installed and used. For applicable
restrictions, see the official configurator tool.
11.3

Upgrading or replacing the CPU

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from its
socket, place it upside down on a nonconducting, antistatic surface.
▶
Never push a CPU over a surface.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
232
46.
65.
Upgrade and Maintenance Manual
Hardware: 15 minutes
Software: 5 minutes
43.
69.
47.
49.
45.
RX1330 M5