▶ Connect the power cable to the power distribution board and to connector
"PWR1" on the system board.
▶ Install all PSUs, see
Concluding steps
▶
"Reassembling" on page 53
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
6.4.5
Replacing the power distribution board
(RX1330 M5S)
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page 49
Removing the defective power distribution board
▶ Remove all PSUs, see
RX1330 M5
"Installing a hot-plug PSU" on page
57.
60.
46.
"Removing a hot-plug PSU" on page
Upgrade and Maintenance Manual
Power supply unit (PSU)
102.
86.
Hardware: 15 minutes
43.
69.
47.
61.
45.
105.
113