Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 71

task. Otherwise, the boot watchdog might initiate a system reboot before the
flash process is complete.
CAUTION
An incomplete firmware upgrade process may render the server
inaccessible or result in damaged/destroyed hardware.
Timer settings can be configured in the BIOS or using the iRMC S6 web
interface.
Disabling the boot watchdog in the BIOS
▶ Enter the BIOS.
▶ Select the Server Mgmt menu.
▶ Under Boot Watchdog set the Action setting to Continue.
▶ Save your changes and exit the BIOS.
For more information on BIOS settings, see the corresponding BIOS
Setup Utility reference manual.
Disabling the boot watchdog using the iRMC S6 web interface
▶ Log in to the iRMC S6 web interface.
▶ Select the Settings menu.
▶ Open the Server Management page.
▶ In the Boot Watchdog group, check the Enable Boot Watchdog Support
option. The Enable Boot Watchdog Support option must be selected.
▶ Select Continue from the Watchdog Action list.
▶ Click Apply for the changes to take effect.
For more information on iRMC settings, see the iRMC user guides.
RX1330 M5 Upgrade and Maintenance Manual
Basic software procedures
71