Figure 107: Removing the SAS expander board
▶ Remove the two screws (see circles).
▶ Get the SAS expander board out of the two connectors of the HDD
backplane and remove it.
CAUTION
▶
Lift up the SAS expander board while removing it in order to
prevent the components to be damaged by the stand-offs (see A
in
Figure
Installing the new SAS expander board
Figure 108: Installing the SAS expander board
▶ Insert the SAS expander board into the two connectors of the HDD
backplane.
CAUTION
▶
Lift up the SAS expander board while inserting it in order to
prevent the components to be damaged by the stand-offs of the
chassis.
▶ Fasten the SAS expander board with two screws (see circles).
RX1330 M5
Hard disk drive (HDD) / solid state disk (SSD)
A
107) of the chassis.
Upgrade and Maintenance Manual
A
165