11.2
Upgrading or replacing the CPU
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
V
CAUTION!
CPUs are modules which are extremely sensitive to electro-static
discharges and therefore must always be handled with care. After a CPU
has been removed from its protective sleeve or from its socket, place it
top down on a non-conducting, antistatic surface. Never push a CPU
over a surface.
11.2.1 Preliminary steps
"Suspending BitLocker functionality" on page 61
Ê
"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê
"Extending the HDD cage out of the chassis" on page 47
Ê
TX1310 M3
Upgrade and Maintenance Manual
Processor (CPU)
Hardware: 15 minutes
Software: 5 minutes
131