Extron electronics XTP II CrossPoint 1600 User Manual page 107

SIS Command and Response Table for Input-Endpoint-Specific Commands (continued)
Command Function
XTP T VGA transmitter specific commands (continued)
Color
NOTE: Color adjustments are available for RGBcvS (SCART), interlaced component video (YUVi), S-video, and NTSC composite video
inputs.
Set a specific color value
Increment color value
Decrement color value
View the color value
Tint
NOTE: Tint adjustments are available for NTSC S-video, and NTSC composite video inputs.
Set a specific tint value
Increment tint value
Decrement tint value
View the tint value
Brightness
NOTE: Brightness adjustments are available for RGBcvS (SCART), interlaced component video (YUVi), S-video, and NTSC composite
video inputs.
Set a specific brightness value
Increment brightness value
Decrement brightness value
View the brightness value
Contrast
NOTE: Contrast adjustments are available for RGBcvS (SCART), interlaced component video (YUVi), S-video, and NTSC composite
video inputs.
Set a specific contrast value
Increment contrast value
Decrement contrast value
View the contrast value
Pixel phase
NOTE: Pixel phase adjustments are available for RGBHV and non-interlaced component video (YUVp) video inputs.
Set a specific pixel sampling phase
Increment sampling value
Decrement sampling value
View the sampling value
X^ = Input number (for other than tie)
NOTE:
X3@ = Picture adjustments
SIS Command Response
(Host to Unit to Endpoint) (Endpoint to Unit to Host)
E X^ X3@ }
I * COLR ColrI
E X^ }
I +COLR ColrI
E X^ }
I –COLR ColrI
E X^ } X3@]
I COLR
E X^ X3@ }
I * TINT TintI
E X^ }
I +TINT TintI
E X^ }
I –TINT TintI
E X^ } X3@]
I TINT
E X^ X3@ }
I * BRIT BritI
E X^ }
I +BRIT BritI
E X^ }
I –BRIT BritI
E X^ } X3@]
I BRIT
E X^ X3@ }
I * CONT ContI
E X^ }
I +CONT ContI
E X^ }
I –CONT ContI
E X^ } X3@]
I CONT
E X^ X3@ }
I * PHAS PhasI
E X^ }
I +PHAS PhasI
E X^ }
I –PHAS PhasI
E X^ } X3@]
I PHAS
– , , or
01 16 32
000 through 255 (128 = default)
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Programming Guide
Additional Description
X^ X3@] Specify the color adjustment.
*
X^ X3@]
Increase the color setting by one.
*
X^ X3@] Decrease the color setting by one.
*
Show the color setting.
X^ X3@]
Specify the tint adjustment.
*
X^ X3@]
Increase the tint setting by one.
*
X^ X3@]
Decrease the tint setting by one.
*
Show the tint setting.
X^ X3@]
Specify the brightness adjustment.
*
X^ X3@]
Increase the brightness setting by one.
*
X^ X3@]
Decrease the brightness setting by one.
*
Show the brightness setting.
X^ X3@]
Specify the contrast adjustment.
*
X^ X3@]
Increase the contrast setting by one.
*
X^ X3@]
Decrease the contrast setting by one.
*
Show the contrast setting.
X^ X3@]
Specify the pixel sampling phase.
*
X^ X3@] Increase the phase value.
*
X^ X3@]
Decrease the phase value.
*
Show the pixel sampling phase.
64
99