Front Panel Configuration Port And Power Leds - Extron electronics XTP II CrossPoint 1600 User Manual

Front Panel Configuration Port and Power LEDs

CONTROL
ENTER PRESET
CONFIG
1
A A
XTP II CrossPoint 1600
Figure 29.
A
B
I/O
VIEW ESC VIDEO AUDIO
PRIMARY
2
REDUNDANT
POWER
XTP II CROSSPOINT 1600
XTP SERIES DIGITAL MATRIX SWITCHER
B B
Front Panel Configuration (Config) Port and Power LEDs
Configuration port — This USB mini-B port serves a similar communications function
as the rear panel Remote port, but it is easier to access than the rear port after the
matrix switcher has been installed and cabled.
NOTE: A front panel Configuration port connection and a rear panel Remote port
connection can both be active at the same time. If commands are sent to both
simultaneously, the command that reaches the processor first is handled first.
Power LEDs —
NOTES:
• The XTP II CrossPoint 6400 and XTP II CrossPoint 3200 have four power
supplies installed. These power supplies are indicated by the following LEDs:
• LEDs 1 and 2 — Indicate the status of the two primary 12 V supplies.
• LED 3 — Indicates the status of the redundant 12 V supply.
• LED 4 — Indicates the status of the 48 V power supply, which provides PoX.
• The XTP II CrossPoint 1600 has two power supplies, which provide 12 V and
48 V in its standard configuration, with two optional, redundant second power
supplies available. These power supplies are indicated by the following LEDs:
• Primary LED 1 — Indicates the status from the standard primary 12 V
supply.
• Redundant LED 1 — Indicates the status of 12 V from the optional
redundant supply.
•
Primary LED 2 — Indicates the status from the standard primary 48 V
supply, which provides PoX.
• Redundant LED 2 — Indicates the status of 48 V from the optional
redundant supply.
Green — Indicates that the associated power supply is operating within normal
tolerances.
Red — Indicates that the associated power supply is operating outside the normal
tolerances or has failed.
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Installation
CONTROL I/O
ENTER PRESET VIEW ESC VIDEO AUDIO
CONFIG
1 3
4
2
POWER
XTP II CROSSPOINT 3200
XTP SERIES DIGITAL MATRIX SWITCHER
A A B B
XTP II CrossPoint 3200
CONTROL I/O
AUDIO
ENTER PRESET VIEW ESC VIDEO
CONFIG
1 3
2 4
POWER
A A B B
XTP II CrossPoint 6400
29