Extron electronics XTP II CrossPoint 1600 User Manual page 50

The current configuration (see figure 35) is now:
• Video — Input 5 video is tied to output 1, output 3, output 4, and output 8.
Audio — Input 5 audio is tied to output 3, output 4, and output 8.
•
Input 5 video tied
to outputs 1, 3, 4, and 8
Input 5 audio tied
to outputs 3, 4, and 8
Input
5
1
3
Output
4
8
Figure 35. Final Configuration, Example 2
Example 3: Remove a tie from a set of ties
In the following example, an existing tie is removed from the current configuration. The
example shows the front panel indications that result from your actions.
NOTE: This example assumes that you have performed
on page 41.
example 2
1. Clear all selections: Press and release the
2. Select audio only for the tie: Press and release the
button as necessary to light
Press the Video button to toggle on and off.
The button is unlit or background illuminated
when deselected.
3. Select an input: Press and release the
Press the button.
The button lights red.
2
1 3 4 5
The Output 3, Output 4, and Output 8 buttons light
red to indicate the audio ties created in example 1.
1 2 3 4 5
The Output 1 button does not light to indicate the tie
created in example 2 because that tie is video only.
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Operation
Video
Audio
button.
Esc
only.
Audio
I / O
VIDEO AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.
button.
Input 5
INPUTS
6 7
8 15 16
OUTPUTS
6 7 8 15 16
example 1 on page 39 and
button and the
Video Audio
42